BPSC on Teletalk: exact pixels, exact caps, no second chances
The BPSC Teletalk help page does not deal in approximations. Your photograph must be exactly 300×300 pixels, under 100 KB, in colour. Your signature must be exactly 300×80 pixels, at most 60 KB. And the same page warns that uploading the wrong specification can see the application treated as cancelled. Here is a calm, repeatable workflow that produces both files correctly — the same workflow that serves you across the many Bangladesh government job portals built on Teletalk.
The rules, straight from the official help page
Every number in this article comes from one place: the official BPSC Teletalk help page, linked in full at the end. That matters, because Teletalk application pages are unforgiving in a very specific way — the checks are largely mechanical, applied to the files you upload, and a file that misses its specification does not get a sympathetic human review at the upload stage. It gets rejected, or worse.
| File | The official specification |
|---|---|
| Photograph | Exactly 300×300 pixels, file size under 100 KB, and in colour — greyscale is rejected. |
| Signature | Exactly 300×80 pixels, file size at most 60 KB. |
| The warning | Uploading the wrong specification can lead to the application being treated as cancelled. |
Dwell on that warning for a moment, because it changes how you should approach the whole task. In many application systems a bad photo is a nuisance: the page reloads, you try again, nothing is lost. Here, the help page itself raises the stakes to cancellation. Whether or not every wrong upload ends that way in practice, the only sensible response is to treat verification as part of the upload, not as an optional extra after it. You check the finished files — pixels and kilobytes, both of them, both files — before the portal ever sees them, the way you would check your name spelling on the form itself. Five minutes of checking is cheap insurance for an application you may have spent weeks preparing.
The colour rule deserves its own note, because it defeats a common trick. When a photo is too heavy, applicants often convert it to black and white, which reliably shrinks a file. On this portal that manoeuvre trades a size problem for a rejection: the photograph must be in colour, and greyscale is refused. The correct way to lose weight here is to resize to the exact pixel dimensions first — which removes the overwhelming majority of a phone photo’s bulk anyway — and only then to adjust export quality modestly until the file slips under its cap with your colours, and your likeness, fully intact.
One workflow for every Teletalk portal
BPSC is the application in front of you today, but it will not be the last Teletalk form you meet. The same pattern — an exact-pixel colour photograph, an exact-pixel signature strip, each with its own size cap — repeats across many Bangladesh government job portals run on the Teletalk system. Learn the preparation workflow once and you own it for all of them, with one essential discipline attached: always re-read the specific portal’s own help page or advertisement before preparing your files, and prepare to its numbers. Portals share a pattern, not a promise. The day you assume last month’s dimensions apply to this month’s circular is the day a perfectly good application trips on a perfectly avoidable detail.
The workflow itself has four movements, and the order matters. First, capture good source material: a sharp, well-lit colour portrait, and a bold signature on plain white paper. Second, crop each source to its final shape — square for the photo, a wide strip for the signature. Third, export at the exact pixel dimensions and a weight under the cap. Fourth, verify the exported files as files — open their properties, read the numbers, and look at the images once more — before uploading anything. Most failures happen because step four is skipped, or because step one was rushed and no amount of editing could rescue a blurred portrait or a faint signature. Software can resize and compress beautifully; it cannot invent detail that was never captured.
Step 1 — capture the portrait and the signature
For the photograph, follow ordinary official-photo discipline: face a plain, light background in even light, look directly at the camera, and keep your head and shoulders in frame with a little margin around them for the square crop. Take the photo in colour, obviously — but also resist any camera filter or portrait-mode effect that alters colours or softens edges; the portal wants a faithful likeness, not a flattering one. Take several shots and keep the sharpest, because at 300×300 pixels every bit of source sharpness survives into the final file.
For the signature, sign your normal signature — the one you use on official documents, not a neatened invention — with a dark pen on plain white paper. Sign at a comfortable, reasonably large size, because a bigger original crops and shrinks down far better than a tiny one enlarges. Photograph or scan the paper square-on in good light, so the strokes are black and the paper reads white. You are aiming for a clean, high-contrast strip: if the signature looks pale or the paper looks grey in your capture, do it again now rather than fighting it at export time.
Make both files to the exact specification
Load your portrait into Passport Photo, crop it square and export exactly 300×300 in colour under 100 KB — then prepare your signature strip at exactly 300×80 under 60 KB. Everything runs in your browser: your files never leave your device until you upload them to the official portal yourself.
Prepare my photo & signatureStep 2 — crop, export, and hit the caps without breaking the rules
Open Passport Photo and load your portrait. Crop square, centred on your face, and export at exactly 300×300 pixels. Check the resulting weight: a correctly resized photo usually lands comfortably under 100 KB, but if yours is still heavy — busy backgrounds and noisy, dimly lit photos carry extra weight — lower the export quality a notch at a time until it fits, staying in colour throughout. Then do the signature: crop tightly around the strokes with a small white margin on every side, and export at exactly 300×80 pixels and at most 60 KB. The strip shape is the part people get wrong most often, usually by uploading a square or near-square signature image and hoping the portal will crop it kindly. It will not. The strip is the specification, so the strip is what you make.
Step 3 — verify like the portal will
Before opening the application form, inspect your two finished files the way a machine would. Open each file’s properties and read the dimensions aloud: 300×300 for the photo, 300×80 for the signature. Read the sizes: under 100 KB for the photo, at most 60 KB for the signature. Open both images and look: the photo unmistakably in colour, the face clear; the signature dark, complete, and not clipped at any edge. Keep the verified files in their own folder with clear names, separate from your originals, so that in the bustle of filling the form — perhaps against a closing deadline, perhaps on a shared computer — there is no chance of picking a similar-looking wrong version. That folder discipline sounds trivial until the day it saves an application, which, given the cancellation warning on the help page, is a day worth insuring against.
Finally, an honest limit. This guide guarantees a method for producing files that match the published specification; it cannot guarantee an application’s outcome, and specifications are set by the recruiting authority for each advertisement. If the circular you are applying under prints different numbers from the help page quoted here, the circular’s numbers govern your application. Read both, follow the specific one, and keep your verified files until the process closes — you will thank yourself if any later stage asks you to upload them again.
Before you upload: the final check
- Photo properties read exactly 300×300 pixels, under 100 KB, and the image is plainly in colour
- Signature properties read exactly 300×80 pixels, at most 60 KB, with no stroke clipped
- Both files are the verified final versions, kept in their own clearly named folder
- You have re-read this portal’s own current help or circular and prepared to its numbers
- The portrait is sharp and filter-free, and the signature is your normal official signature
Fair questions
What are the BPSC Teletalk photo requirements?
The official BPSC Teletalk help page requires a photograph of exactly 300 by 300 pixels, with a file size under 100 KB, in colour. A greyscale photograph is rejected, so do not convert your portrait to black and white to save space.
What are the BPSC Teletalk signature requirements?
The signature must be exactly 300 by 80 pixels, at most 60 KB, according to the same official help page. That is a wide, short strip — sign on plain white paper, photograph or scan the signature, and crop it to the exact strip rather than uploading a square image.
What happens if I upload the wrong size?
The help page warns that uploading the wrong specification can lead to the application being treated as cancelled. That is why the exact pixel dimensions matter so much: verify the finished files' properties before you upload, not after.
Does the same workflow help on other Teletalk portals?
Yes. The same Teletalk pattern — an exact-pixel colour photo and an exact-pixel signature strip, each under a stated cap — repeats across many Bangladesh government job portals built on Teletalk. Learn the workflow once with Passport Photo, then always confirm the specific numbers on the portal you are applying through, because each advertisement sets its own application.
Why is my colour photo over 100 KB, and how do I fix it?
Because a phone photo starts thousands of pixels across and megabytes heavy. Resize it to exactly 300 by 300 pixels first — that alone removes most of the weight — then adjust export quality only as much as needed to come in under 100 KB, keeping the image in colour throughout.
Is my photo uploaded to a server when I use PDFJadoo?
No. PDFJadoo's passport photo tool runs in your browser, so cropping and resizing happen on your own device and your files are never uploaded. You download the finished photo and signature files and upload them to the official portal yourself.
Sources: Bangladesh Public Service Commission (BPSC) Teletalk official help page — photograph exactly 300×300 px, under 100 KB, in colour (greyscale rejected); signature exactly 300×80 px, at most 60 KB; warning that the wrong specification can lead to the application being treated as cancelled (bpsc.teletalk.com.bd/scdr/options/help.php). Always confirm the numbers in your own advertisement’s instructions. This page is general information only. PDFJadoo is not affiliated with BPSC or Teletalk.
Sources
- Bangladesh Public Service Commission — Wikipedia: Background on the BPSC, the commission whose Teletalk application portals set the photo and signature specifications this guide works to. The Teletalk portal itself was unreachable from this network during this check, so the specifications here are the portal's published spec as set out in the guide.
- Tool behaviour — the steps and limits in this guide are from PDFJadoo's own Fix Photo tool page, checked 19 November 2026; the file never leaves your device, so the result you preview is the file you save.
Keep reading
BPSC photo 300×300, signature 300×80
The focused walkthrough for these exact sizes.
Passport Photo
Crop and export portraits and signatures to spec.
Why was my photo rejected?
The usual causes behind portal photo rejections.
Compress a PDF to an exact size
When a portal gives you a number, hit the number.