PDFJadoo › Blog › BPSC Photo 300x300, Signature 300x80

BPSC wants exact pixels: 300×300 photo, 300×80 signature

Most portals give you a size range and some room to breathe. The BPSC Teletalk portal does not. The photo must be exactly 300 × 300 pixels. The signature must be exactly 300 × 80 pixels. Not close — exact. And the portal's own help page is blunt about what happens otherwise: an application with the wrong specs is treated as cancelled. The same Teletalk system runs dozens of Bangladeshi government job portals, so this one fix travels a long way.

Free, in your browserFiles never uploadedSpecs from Teletalk's official help page
PDFJadoo logoBy the PDFJadoo Team5 min read
Diagram: BPSC Teletalk's exact frames — a colour photo at exactly 300 by 300 pixels under 100 KB, and a signature strip at exactly 300 by 80 pixels under 60 KB
Exact means exact. The good news: an exact size is the easiest kind to prepare on purpose.

The spec, exactly as the Teletalk help page sets it

UploadWhat the portal asks for
PhotographExactly 300 × 300 pixels, under 100 KB, in colour — greyscale is rejected
SignatureExactly 300 × 80 pixels, 60 KB or less
If the specs are wrongThe application is treated as cancelled — the portal's own words, not a warning to take lightly

Four reasons your files get refused

The fix, step by step

Step 1 — the photograph. Open the Passport Photo maker and choose the “BPSC / Teletalk job application - photograph” preset. It crops you square and exports at exactly 300 × 300 pixels, inside the 100 KB cap, in colour. Use a colour photo to begin with — if your only photo is black and white, take a fresh one against a plain background.

Step 2 — the signature. Sign your name on plain white paper, in your normal hand, and photograph it straight from above. In the maker, choose the “BPSC / Teletalk job application - signature” preset and frame the signature inside the wide, short strip. The export is exactly 300 × 80 pixels and under 60 KB.

Step 3 — check the pixels, not the preview. Before you go back to the form, open each file's properties and read the dimensions with your own eyes: 300 × 300 and 300 × 80. Screens lie about size; properties do not.

Step 4 — upload the prepared files. If your portal offers its own photo validator, run the files through it as a final check — it exists because this step fails so often.

Applying through a different Teletalk portal — a ministry, a bank, a university? The pattern repeats across the system, but every circular is its own authority: read your circular's numbers first, then prepare to them the same way. More portals and their rules live on our Document Portals hub.

Make both files exactly, before the form

Two presets, two exports, two pixel checks. Five minutes now beats a cancelled application later.

Open the Passport Photo maker

A worked example: both files wrong, both files fixed

Take a candidate who did almost everything right. The photo was taken fresh, in colour, against a plain background — and exported at exactly 300 × 300 pixels. But the export came out at 120 KB, the failure named in the questions below: pixels right, file size over the 100 KB cap. The signature had the opposite problem. It was photographed as a square, like a small photo, so the strip the portal wants — exactly 300 × 80 — could only be made by squashing the square down, which would have stretched every letter sideways.

Here is the repair, in the order the fix section teaches. The photo goes back through the Passport Photo maker's BPSC photograph preset, which holds the pixels at exactly 300 × 300 while bringing the file inside the cap — the candidate reads the properties afterwards and sees both facts at once: 300 × 300, under 100 KB. The signature is not rescued from the square crop at all. It is rebuilt: the name signed again on plain white paper, photographed straight from above, and framed inside the signature preset's wide, short strip, so the export is exactly 300 × 80 and under 60 KB with the letters in their true shape. Two exports, two property checks, and the pair is ready before the form is opened.

When an exact file still gets refused — check these, in order

First, one dimension drifted by a pixel. A resize done by percentage instead of by typed dimensions is how 300 × 300 becomes 300 × 301, and this portal treats that as a different file. Read both numbers in the properties, not one. Second, the colour quietly went missing. A studio photo scanned in black and white, or an editor that exported in greyscale, fails the colour rule even at perfect pixels — take a fresh colour photo rather than trying to colourise the old one. Third, you uploaded the camera twins. The gallery holds the original and the prepared export side by side with the same face on both thumbnails; pick by dimensions and size, never by picture. Fourth, the signature was stretched instead of reframed. A squashed signature may pass the pixel check and still be a signature no one recognises as yours — rebuild it as the worked example does.

The same discipline travels across the Teletalk system, and the neighbouring portals in this series rhyme with it: India's IBPS form runs four uploads, each with its own window, and the SSC photograph fails at both edges of a 20 to 50 KB window. Exact or windowed, the habit is identical — prepare to the portal's printed numbers, then read the finished file's properties before the form ever sees it.

Before you upload: the 60-second check

Fair questions

My photo is 300 by 300 but 120 KB. Will it pass?

No — pixels and file size are two separate checks, and both must pass. Re-export the photo so it also lands under 100 KB. The BPSC photograph preset in the Passport Photo maker holds the pixels at exactly 300 × 300 while bringing the file size inside the cap.

Why was my black and white photo rejected?

Because the Teletalk help page asks for a colour photograph, and greyscale is rejected. Take a fresh colour photo against a plain background and prepare that one instead.

Do other Teletalk job portals use the same sizes?

The 300 × 300 photo and 300 × 80 signature pattern repeats across Teletalk-hosted government job portals, which is why this fix travels. But treat your own job circular as the authority — read its numbers first, then prepare your files to them.

Can I resize a photo myself instead of using a preset?

You can, if your editor lets you set exact pixel dimensions — 300 × 300, not a percentage. Percentage resizing is how files end up at 300 × 301. A preset simply removes the guesswork.

Are my photo and signature uploaded to your server?

No. The Passport Photo maker runs entirely in your browser. Your files never leave your device.

I made the signature 300 by 80 but it looks stretched sideways. Will it pass?

The pixels are right, but a signature should not be manufactured by squashing a square crop — the letters distort and the signature stops looking like yours. Sign again on plain white paper, photograph it straight from above, and frame that wide, short original inside the signature preset instead.

My photo is exactly 300 by 300 and under 100 KB, but it is a scan of an old black and white studio photo. Is it acceptable?

No. The Teletalk help page asks for a colour photograph, and greyscale is rejected — a black and white scan fails the colour rule however exact its pixels are. Take a fresh colour photo against a plain background and prepare that one.

Source: the official BPSC Teletalk portal help page (bpsc.teletalk.com.bd), re-checked 10 November 2026. Job circulars can restate requirements — your current circular is the authority. This page is general information only. PDFJadoo is not affiliated with or endorsed by BPSC or Teletalk.

Sources

Keep reading