Australian passport photo rejected? the size band is only the first trap
Australia does not ask for one exact photo size. It asks for a band — 35–40 mm wide by 45–50 mm high — with your face measuring 32–36 mm from chin to crown inside it. Most rejections are not about the outer size at all. They are about glasses, shadows, old photos and helpful-looking retouching.
The official rules, exactly as the Passport Office publishes them
The Australian Passport Office publishes its photo guidelines on passports.gov.au, and it is blunt about why they matter: Australia uses biometric technology to match your face against the image in your passport, so the photo has to work for a machine as well as for a person. You lodge two good-quality photos with your application. If a photo does not meet the guidelines, the Office may ask you to provide a new one when you lodge, or while your application is being assessed — which is where the delay begins.
| Requirement | What the Passport Office specifies |
|---|---|
| Photo size | 35–40 mm wide × 45–50 mm high. |
| Face height | 32–36 mm, measured from your chin to your crown. |
| Age of photo | Less than 6 months old. |
| Background | Plain white or light grey, contrasting with your face; no shadows, reflections or pattern. |
| Expression and pose | Face centred, looking straight at the camera, neutral expression, eyes open for anyone over 3 years old; head not tilted in any direction. |
| Glasses | Must not be worn unless they cannot be removed for medical reasons; vision impairment alone is not an acceptable reason. |
| Retouching | None — no removing moles, wrinkles or scars, and no skin smoothing. |
| Print quality | Good-quality colour prints produced by dye sublimation (not an inkjet printer), on heavy-weight glossy paper of at least 200 gsm; clear and in focus, with no marks or red-eye. |
| Lighting | Uniform lighting with brightness and contrast that show your natural skin tone. |
Two details in that table catch people out. The first is the crown. Face height runs from chin to crown — the top of the head — and the measurement has to land inside a 4 mm window. A photo cropped generously for another country will often put the face at 28 mm or 39 mm: correctly sized on the outside, wrong on the inside. The second is the print rule. An Australian passport application is a paper process, and the Office specifies the print itself — dye sublimation, glossy, at least 200 gsm. A home inkjet print on ordinary photo paper fails a rule that has nothing to do with how you look in the picture.
Honesty about our own tool belongs here, because the Passport Office states it plainly: it recommends a professional passport photo provider, and it does not recommend using an online passport photo service or a mobile app, warning that these may put you in danger of identity fraud. Read the worked example below with that warning in mind. PDFJadoo runs entirely in your browser — your photo is never uploaded to a server — and the sensible way to use it is as a framing and measurement check before you pay for compliant prints, not as a substitute for the print standard itself.
Why Australian passport photos get rejected
The Passport Office publishes its own gallery of unacceptable photos, and it reads like a list of good intentions. Smiling. Glasses on. A parent's hand steadying a child. A background tidied up afterwards in an editor. Hair across the eyes. Each one is understandable, and each one is named as a failure. Work through this checklist against your photo before you lodge — it covers the reasons the Office itself gives.
- Face height outside 32–36 mm, even though the outer photo size is inside 35–40 × 45–50 mm
- Glasses worn without a medical reason — or, where glasses genuinely cannot be removed, frames obscuring the eyes or reflections on the lenses
- Photo 6 months old or older, however accurate it still looks
- A smile or any non-neutral expression; the Office lists even a subtle expression as unacceptable
- Shadows or reflections anywhere — on the face, or falling across the background
- A background that is not plain white or light grey, or one that was edited in afterwards
- Retouching of any kind, including skin smoothing and removing moles, wrinkles or scars
- Hair obscuring the edges of the face or covering the eyes
- Head tilted, turned to the side, or photographed too close so the framing distorts the face
- Wireless earbuds left in — the Office says AirPods and similar earbuds are not hearing aids and must be removed
- A hat or a patterned head covering; religious coverings must be plain and show the whole face from chin to forehead, with both edges visible
- An inkjet home print, a grainy or blurred image, red-eye, or ink marks on the print
Notice how few of these are about the camera. Most rejections happen at the edges of the process: the photo from last year's application reused to save money, the glasses left on out of habit, the beauty filter a phone applied without asking, the home printer. The biometric system needs a plain, current, unedited record of your face. Anything that makes the photo nicer tends to make it less usable.
Children have narrow exceptions, and only narrow ones. A child under 3 may have their mouth open, but no one else may be visible in the photo — no supporting hand, no parent's shoulder. Everyone over 3, children included, must face the camera straight on with eyes open and a neutral expression. If a medical condition makes any guideline impossible to meet, the Office asks for a medical certificate or a completed B-11 form explaining why; do not simply lodge and hope.
The fix, step by step
Step 1 — Start from a new photograph. If your existing photo is anywhere near 6 months old, retake it. Stand against a plain white or light grey wall in even, natural light, with no window behind you and no lamp to one side. Remove glasses, earbuds and hats. Keep a neutral expression with your mouth closed, eyes open, head level and centred.
Step 2 — Frame it with the Passport Photo tool. Open PDFJadoo's Passport Photo tool and choose the Australian passport format. Position your face so the chin-to-crown span sits in the middle of the permitted range — aim for about 34 mm rather than the edges of 32 or 36 — and export the framed image. Everything happens in your browser; the photo never leaves your device, which matters for an identity document.
Step 3 — Check the export like an examiner. Zoom in. Are the edges of your face clearly visible, with no hair across them? Is the background uniformly plain, with no shadow of your head on the wall? Is the image sharp, with no red-eye and no smoothing sheen on the skin? If the phone applied a beauty mode, retake with it switched off — a filtered photo is a retouched photo.
Step 4 — Print to the print standard, not to your printer. Take the framed file to a passport photo provider, a post office, a camera store or a pharmacy that produces dye-sublimation prints on glossy paper of at least 200 gsm. Ask for two prints, and measure them before you leave: outer size inside 35–40 × 45–50 mm, face inside 32–36 mm. A ruler at the counter is the cheapest insurance in the whole application.
Step 5 — Lodge promptly. A photo's 6-month clock keeps running while an application waits. Lodge while the photo is comfortably in date, and keep the digital original — if the Office asks for a new photo during assessment, you want to reprint the same compliant image, not start again.
Frame your photo to the Australian band — free
The Passport Photo tool crops to the Australian format and centres your face in the 32–36 mm chin-to-crown range. It runs in your browser — your photo is never uploaded.
Frame my passport photoA worked example: the photo that failed twice
Consider a typical case. An applicant reuses a photo taken for a driver licence nine months earlier. At the counter, the first failure is age alone: nine months is outside the less-than-6-months rule, and no other quality can rescue it. She retakes the photo on her phone, in the kitchen, wearing her glasses because she always wears them. That photo fails twice more — glasses without a medical reason, and a patterned curtain behind her that is not a plain background.
The third attempt follows the steps above. The photo is taken against a plain light grey wall in daylight, glasses and earbuds off, expression neutral. In the Passport Photo tool, the first framing puts her face at 31 mm chin to crown — just under the band — so the crop is tightened until the face measures about 34 mm, safely centred in the range. The prints are made at a camera store on glossy dye-sublimation stock and measured at the counter: 38 × 48 mm outside, 34 mm face. Both measurements sit inside their bands with room to spare, which is exactly where you want them — a measurement on the very edge of a range is one printing variation away from a rejection.
The lesson generalises. Almost every rejected Australian passport photo fails on a rule the applicant already knew, applied loosely. The bands are not tight — 5 mm of width, 5 mm of height, 4 mm of face — but they are measured, and “close enough” is a judgement the counter does not get to make in your favour.
The 60-second check before you lodge
Hold the prints up, one at a time, and ask six questions. One: is this photo less than 6 months old? Two: do the outer dimensions fall between 35–40 mm wide and 45–50 mm high? Three: does my face measure 32–36 mm from chin to crown? Four: is the background plain white or light grey, contrasting with my face, with no shadow or reflection anywhere in the frame? Five: am I bare of glasses, earbuds and headwear, with a neutral expression, eyes open, head straight, and the edges of my face visible? Six: is the print sharp, in colour, unretouched, and produced on heavy glossy stock rather than a home inkjet?
Six yeses, and the photo is as ready as a photo can be. Any no is a retake or a reprint — cheap now, and expensive once it becomes a letter asking for a new photo while your application waits. The Passport Office's unacceptable-examples gallery exists because these six questions are so often skipped. Sixty seconds is a fair price for not joining it.
Fair questions
What size must an Australian passport photo be?
Between 35 and 40 mm wide and between 45 and 50 mm high. Inside that frame, the height of your face from chin to crown must be between 32 and 36 mm.
Why was my photo rejected because of my glasses?
You must not wear glasses in an Australian passport photo unless you cannot remove them for medical reasons. Vision impairment alone is not an acceptable reason. If glasses genuinely cannot be removed, the frames must not obscure your eyes and there must be no reflection from the lenses.
How recent does an Australian passport photo have to be?
Less than 6 months old. An older photo can be refused even when its size, background and lighting are all correct.
What background does an Australian passport photo need?
A plain white or light grey background that contrasts with your face, with no shadows, reflections or pattern on it. A background that has been edited in afterwards is listed by the Passport Office as unacceptable.
Can I retouch or smooth my passport photo?
No. The guidelines prohibit any retouching, such as removing moles, wrinkles or scars, and the Passport Office lists retouching and skin smoothing among its unacceptable examples.
Can I take my Australian passport photo myself?
The Passport Office recommends a professional passport photo provider and says it does not recommend online passport photo services or mobile apps, because they may put you in danger of identity fraud. Whoever takes the photo, it must meet every guideline — and the prints must be good-quality colour prints on heavy-weight glossy paper of at least 200 gsm, produced by dye sublimation rather than an inkjet printer.
Sources: Australian Passport Office (Department of Foreign Affairs and Trade) — Passport photos (photo 35–40 mm wide × 45–50 mm high; face 32–36 mm chin to crown; less than 6 months old; plain white or light grey background; no glasses unless medically required; no retouching; dye-sublimation prints on glossy paper of at least 200 gsm; recommendation of professional providers and warning against online photo services and apps). Unpublished item: the Passport Office publishes no pixel dimensions or file-size limit for a digital version of the photo on this page, so this guide gives none — the Australian application standard it publishes is for prints. This page is general information only and is not legal or immigration advice. PDFJadoo is not affiliated with the Australian Passport Office or the Department of Foreign Affairs and Trade.
Sources
- Australian Passport Office — Photo requirements: The Australian Passport Office's official photo rules — the 35–40 mm head-size and background requirements this guide works through.
- Tool behaviour — the steps and limits in this guide are from PDFJadoo's own Passport Photo tool page, checked 18 November 2026; the file never leaves your device, so the result you preview is the file you save.
Keep reading
Passport Photo
Frame and measure a photo to the Australian band, in your browser.
Why was my photo rejected?
The failure patterns that repeat across every country's photo rules.
UK visa photo requirements
A different system with a digital-first photo — useful contrast.
JPG to PDF
Turn a photo into a clean PDF when a form asks for one file.