SSC signature rejected? It may be too small — not too big
Most people do the obvious thing. The form rejects the signature, so they shrink it. It rejects it again, so they shrink it more. Here is what is actually going on: SSC's signature window is 10 to 20 KB. A file of 8 KB is outside the rule, just like a file of 26 KB. The goal is not “as small as possible”. The goal is the middle of the window.
The rule, exactly as SSC's notices set it
| Part of the rule | What SSC asks for |
|---|---|
| Format | JPEG |
| File size | Between 10 KB and 20 KB — both edges count |
| Shape | About 4.0 × 2.0 cm (some newer notices say 6.0 × 2.0 cm — check yours) |
| The signature itself | Your normal signature, in black ink, on plain white paper |
Why signatures fail — all three ways
- Too big. A straight phone photo of the page, unedited, can be several MB
- Too small. The quiet one. A hard-compressed file under 10 KB fails the floor, and the form's message rarely tells you that is what happened
- Bad crop. The signature is a tiny squiggle in the middle of a huge photo of the desk. Crop tight around the signature and both the shape and the size fall into place
And a word on the signature itself: sign the one you really use. It should be the same signature you will produce at the exam centre — not a careful new invention for the form.
The fix, step by step
Step 1. Sign on a plain white sheet with a black pen. Sign it a normal size — not tiny. A bigger, clear signature photographs better and gives the crop something to work with.
Step 2. Photograph it flat, straight from above, in even light. No shadows across the paper, no angle. The signature should fill most of the frame.
Step 3. Open the Passport Photo maker and choose the “SSC exam - signature” preset. It crops to the notice's signature frame and exports a JPEG inside 10–20 KB, aimed at the middle of the window.
Step 4. Check the file's size with your own eyes before uploading. It should read between 10 and 20 KB — around 14 or 15 KB is the comfortable spot.
Photo failing too? That is a separate window with its own traps — see why SSC photos get rejected. Both files together, with both presets, are on the SSC photo and signature page.
Make the signature now — aim for the middle
One preset export lands the file near 14 KB instead of on either edge. Two minutes, done, and the form stops arguing with you.
Open the Passport Photo makerA worked example: two failures, then the file that passed
Say your application is half filled in and the signature is the last thing standing. Here is the journey most people take — including the wrong turns — so you can skip straight to the end of it. The first attempt is the obvious one: sign the sheet, photograph the whole page, upload. Several MB. Rejected, too big — that much the form makes clear.
The second attempt is the quiet trap this page is named after. Stung by the first refusal, you run the photo through the hardest compression you can find. The file comes out at 8 KB and you upload it feeling virtuous. Rejected again — and this time the message gives you nothing, because forms rarely confess that a file was too small. Nothing about the signature changed between the two attempts. Only its position relative to the window did: first far above 20 KB, then below the 10 KB floor.
The third attempt takes two minutes. Sign again — or use the same sheet — photograph it straight from above, and crop tight around the signature so the frame holds the signature and very little else. Export through the “SSC exam - signature” preset in the Passport Photo maker. The file lands at about 14 KB: a JPEG, inside the window, near the middle of it. Check the size with your own eyes, then upload. It goes through — not because the signature improved, but because the file finally sits where the rule wants it.
Still refused? Work through these four, in order
- You uploaded the photo file. The photo and the signature sit side by side in your gallery with near-identical names, and the photo has its own separate window — 20 to 50 KB — with its own reasons for failing. Check which file you actually picked
- Your notice's dimensions are the other pair. A file cropped to 4.0 × 2.0 cm against a notice asking for 6.0 × 2.0 cm (or the reverse) can bounce even at a perfect size. The KB window is identical; the shape in your notice governs
- The ink is too faint to read. A light, scratchy signature photographed in poor light can survive the size check and still be useless. Sign at your normal size with a black pen that is actually flowing, on plain white paper, and photograph in even light
- Another app changed the file after export. Editing, forwarding or re-saving the exported JPEG in a second app can push its size back out of the window. Check the size of the exact file you are about to upload — not the one you exported an hour ago
Before you upload: the 60-second check
- The file is a JPEG, and its size reads between 10 and 20 KB
- The crop is tight around the signature — no desk, no page edges
- It is your normal signature, in black ink, on white paper
- Your notice's dimensions match (4.0 × 2.0 cm, or 6.0 × 2.0 cm on newer notices)
- You are uploading the signature file — not the photo file by mistake
Fair questions
My signature file is 8 KB and it failed. Why?
Because 8 KB is under the floor. The window is 10 to 20 KB, and a file below 10 KB is outside the rule just like one above 20 KB. Export it again with less compression — aim for about 14 or 15 KB — and check the size before uploading.
My notice says 6.0 × 2.0 cm. This page says 4.0 × 2.0. Which is right?
Your notice. SSC's notices differ between cycles: older ones give about 4.0 × 2.0 cm, some newer ones 6.0 × 2.0 cm. The KB window — 10 to 20 KB, JPEG — is the same. Follow the dimensions in the notice for your exam.
Can I sign on my phone screen instead of paper?
It is a poor idea. The rule describes a scanned signature: pen on paper. A screen photo brings glare, a wrong crop, and a signature that may not match the one you sign at the exam centre. Paper, black pen, and a straight photo from above take two minutes and work.
Does the signature have to match anything?
Sign the signature you actually use — the one you will sign with at the exam centre and on your admit card. Use your normal signature, not a new one invented for the form, and keep it the same across your application.
Is my signature uploaded to your server?
No. The Passport Photo maker runs entirely in your browser. Your signature never leaves your device.
My signature looks faded at 14 KB. Should I export it bigger than 20 KB?
No — over 20 KB is outside the window, whatever the reason. Work inside it instead: the window runs to 20 KB, so an export nearer that end carries more detail than one at 14 KB. Better still, fix the source — sign a little larger, with a black pen that flows properly, on plain white paper — then export again. A darker, bigger signature survives compression; a faint one does not.
Can I reuse the same signature file for another SSC exam?
Usually, yes — the specification is stated across the CGL, CHSL, JE and GD notices, and the KB window (10 to 20 KB, JPEG) is the same. What changes between cycles is the shape: some notices say about 4.0 × 2.0 cm, newer ones 6.0 × 2.0 cm. Read the new notice, and if its dimensions differ from the file you have, re-export at that shape rather than reusing blindly.
Source: SSC exam notices — the signature specification is stated across the CGL, CHSL, JE and GD notices; see the CGL notice on ssc.gov.in. Portal rules change between cycles — re-check your current notice before applying. This page is general information only. PDFJadoo is not affiliated with or endorsed by the Staff Selection Commission.